Instant Digital Download
MACHINE EMBROIDERY DESIGNS
lace Freestanding in the hoop
Set of 2 Freestanding Lace Machine Embroidery Designs
3 sizes 4x4,5x7,6x10 hoop
Use Vilene water soluble stabilizer;
Use the same thread for the upper and bobbin to get two-sided embroidery.
DO NOT embroider several designs in one hoop.
To assemble the box, use zigzag or glue
Step One: Hoop two layers of water soluble Vilene stabilizer. Embroider the designs one by one. To get two-sided embroidery, use the same thread for the upper thread and the bobbin thread. Dissolve the stabilizer, and leave to air dry.
Step Two: Start assembling the box. Take two panels and press them with steam. Align the side edges and zigzag them together. Use monofilament invisible thread.
Step Three: Take the third panel, press it with steam and zigzag it to the first two panels. Connect all 4 panels. Do not stitch the last seam to connect the first and the fourth panels.
Step Four: Take the pattern of the bottom, press with steam and zigzag to the bottom edge of each panel.
Step Five: Now zigzag the last seam from the inside.
You will receive instant access to the following formats:
Embroidery designs is available to download immediately after purchase .
you can download from the My Account -> Downloads section of the site .