gewine in the HOOP Mug Rug,Placemats.Coasters.Quilting machine embroidery design 5 sizes

Product Code: gewine ITH Placemats.Coasters.Mug Rug,Quilting
Availability: In Stock
Price:
$4.99

Instant Digital Download: 1 ZIP included
Qty: - +
   - OR -   

MACHINE EMBROIDERY

4 pieces designs

5 sizes

4x4 - 98x98 mm

5x5 - 128x128 mm

6x6 - 158x158 mm

7x7 - 178x178 mm

8x8 - 198x198 mm

-- Can provide any size you wish just contact me

You will receive instant access to the following formats:

jef - janome
 
HUS – Viking, Husqvarna
 
PES – Brother, Baby Lock, Bernina
 
dst - tagima machines
 
exp - melco - bernina
 
xxx - compucon .singer
 
vip - Viking, Husqvarna
 
Instructions
 
Materials Needed:
 
- embroidery hoop
-Tear away stabilizer
- Sharp curved scissors
 
STEP 1
 
Transfer the design to your machine.
Embroider color 1 on stabilizer only. This is a placement line showing you where to lay your fabric that has been fused with the heavyweight interfacing. After color 1 is complete, center the fabric over the placement line making sure there is fabric outside of the placement line.
Embroider color 2 which is a tackdown stitch, holding the fabric to the tearaway stabilizer. After color 2 is complete, use a small pair of sharp scissors to trim right next to the stitching line. It is very important that you take your time and trim as close as possible using your best pair of scissors.
 
STEP 2
 
Before you embroider the back appliqué fabric, you must remove the hoop from the embroidery arm and lay a piece of appliqué fabric over the back of the hoop. Make sure it will cover the tag with extra fabric outside of the stitching line. If necessary, you can use painter's tape to hold the fabric in place while you put the hoop back on the embroidery arm.
 
 
Embroider the back appliqué fabric tackdown stitches and then trim the appliqué fabric, from the wrong side, close to the stitching line. It will be necessary to remove the hoop from the embroidery arm to trim. If you have used painter's tape, remove all of the tape before putting the hoop back on the embroidery arm.
 
STEP 3
 
When you are all done, tear away the finished tag from the tearaway stabilizer while it’s still in the embroidery hoop.
 
STEP 4
 
When the parts are assembled with the completion of glue or Zigzag sewing machine
 
 Please contact me if you need another format or other sizes
 
-----------------------------------------------------------------------------------------------
Instant Digital Download: 1 ZIP included
 

Embroidery designs is available to download immediately after purchase .
you can download from the My Account -> Downloads section of the site .

 

Write a review


Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:




Related Products (103)